The AMPV, or Armored Multi-Purpose Vehicle, was jointly developed by Krauss-Maffei Wegmann (KMW) and Rheinmetall. It was developed as a private venture to compete for the German Army GFF/GTF requirement. The AMVP was designed taking into account the operational experience of the German Army in Afghanistan. This light multipurpose armored vehicle was revealed in 2010. It is being proposed both for military operators and law enforcement forces.
The AMPV is intended to be used for roles, where non armored HMMWVs, Land Rovers andb G Wagons are typically used. It is broadly similar to US JLTVs, but heavier and better protected. It is well suited for light utility, patrol, light recon, surveillance, command and communications duties. This vehicle is also suitable for police and security forces where armor protection is required. It can be considered as a lightweight MRAP. However it is not a replacement for dedicated armored or mine protected vehicles.
There are two versions of the AMPV. The Type 1 is a smaller vehicle. It has a payload capacity of 2.6 t. This protected vehicle accommodates four soldiers. The Type 2 is larger, better protected and carries more payload. Most of the components are interchangeable between both versions.
AMPV 1 or Type 1
The AMPV 1 should have the dimensions of a VW van with 4.90 meters long, 2.20 meters wide and 2.10 meters high, approximately. The AMPV 2 should be slightly larger. The AMPV 1 is designed primarily as a patrol vehicles and should therefore provide the soldiers maximum protection against projectiles, mines or IEDs. A full-scale model was presented in June 2008 at the Eurosatory in Paris. The first prototype ran in 2009. Series production could start from 2011, if there are principal. Translated by google – Source panzerbaer.de
The AMPV offers a protected transport capacity. Its safety cell is made from steel armor with composite armor inserts. Interior is lined with a spall liner. Floor of the vehicle is reinforced for protection against mines and IEDs. Protection can be enhanced by adding passive armor modules. NBC protection system is proposed as an option.
The AMPV can be fitted with remotely controlled 7.62-mm or 12.7-mm machine gun, or a 40-mm automatic grenade launcher. These weapons are used for self-defense. Other weapon options are available.
7.62-mm Rheinmetall MG3
The MG3 essentially is a conversion of the MG42 to 7.62x51mm NATO. Early versions were simply conversions but later versions feature a multitude of minor upgrades in various areas. The MG3 retains the short recoil operation and roller locking mechanism. It is belt fed only and feeds from left to right. The square slotted forearm is open on the right to allow the quick change barrel to be removed. The MG3 can be used from the attached bipod, from a tripod and as a pintle mounted or coaxial machine gun.
The MG3 fires the 7.62x51mm NATO round from 50 round DM1 continuous belts or M13 or DM6 linked belts, mostly of 120 round length. The cyclic rate of fire is about 1.200 rpm. This results in a high ammunition consumption and rapid overheating. The barrel should be changed every 150 rounds fired in rapid succession. The MG1A2 and MG42/59 versions have a lower rate of fire of 900 rpm. The maximum effective range is 600 m from the bipod and 1 km when used from a tripod. The slant range is much longer.
|Operation||Short recoil, roller locking|
|Rate of fire||1.000 – 1.300 rpm|
|Barrel length||565 mm|
|Rifling||4 grooves, 305 mm right hand twist|
|Muzzle velocity||820 m/s|
|Sights||Iron sights, barleycorn front and notch rear, 200 to 1.200 m gradations, 430 mm sight radius|
MG3 data weaponsystems.net
12.7-mm machine gun M2A1
General Dynamics Ordnance and Tactical Systems developed the M2A1 .50 caliber weapon after more than 30 years of experience manufacturing the M2 heavy barrel (HB) machine gun for the U.S. Department of Defense.
The M2 machine gun is one of the world’s most reliable, highly accurate and effective weapons. The M2A1 offers the proven performance and in-place logistics
support of the existing M2HB machine gun, along with the new features and design improvements of the quick change barrel (QCB) system and flash hider. These upgrades increase the performance of the battle-proven M2 and are adaptable to existing M2HB weapons.
- Fixed headspace and timing
- Reduces safety concerns associated with barrel
- Simplifies warfighter training
- Eliminates operator requirement to adjust the headspace and timing.
- Positive barrel engagement
- Ensures the barrel is securely locked and aligned with the patented J-slot barrel retention system.
- Improved flash hider
- Decreases muzzle flash, making the M2 night-vision friendly.
- Robust, removable barrel handle
- Streamlines hot-barrel changing.
|Caliber||.50 caliber / 12.7mm (NATO)|
|Weight||84 pounds (38.2 kg)|
|Length||67.75 inches (1,721mm)|
|Width||9 inches (230mm)|
|Cyclic rate of fire||450-600 rounds per minute|
|Muzzle velocity||2,910 feet per second
(890 meters per second)
|Max Effective Range||2,000 yards (1,830m)|
|Maximum range||7,440 yards (6,800m)|
M2A1 data gd-ots.com
40-mm automatic grenade launcher
MK-19 40mm grenade launcher @iracllc.com
MK19 40mm Machine Gun, MOD 3
The MK19 Mod3 40mm Grenade Machine Gun was first developed by the Navy in the early 1960’s. TACOM-ARDEC has since suggested modifications to this system which has enabled the Army to deploy the MK19 in the harsh environments encountered during world-wide operations and has therefore enhanced its performance. The MK19 firing rate is over 350 grenades per minute and it is effective to ranges of over 2200 meters. The system was deployed in Southwest Asia during Operation Desert Storm and devastated enemy infantry.
Manufacturer: Saco Defense Industries
Length: 43.1 inches (109.47 centimeters)
Gun: 72.5 pounds (32.92 kilograms)
Cradle (MK64 Mod 5): 21.0 pounds (9.53 kilograms)
Tripod: 44.0 pounds (19.98 kilograms)
Total: 137.5 pounds (62.43 kilograms)
Muzzle velocity: 790 feet (240.69 meters) per second
Bore diameter: 40mm
Maximum range: 2200 meters
Maximum effective range: 1600 meters
Rates of fire:
Cyclic: 325-375 rounds per minute
Rapid: 60 rounds per minute
Sustained: 40 rounds per minute
MK-19 data fas.org
Remotely controlled WS
REMOTE CONTROLLED LIGHT WEAPON STATION FLW 100
Modular and efficient
The remote controlled Light Weapon Station FLW 100 is constructed in a completely modular design. Via a standardized interface weapons of calibers 5,56 and 7,62 can be integrated quickly and safely. The interface and operating software permit the weapon system to be changed within minutes.
Adequately encountering any threat
Thanks to the simple adaptation without roof opening and their low weight, the FLW 100 can be employed across almost all vehicle types and also autonomously. – such as for camp protection. The same weapon station, for example, can be moved from a MBT to a low-protection patrol vehicle. Automatic vehicle detection, weapons, optoelectronic module, standardized operating and display concept, as well as cross-system standardized operating and display concept as well as an efficient safety and test system guarantee simple integration and operability. The safety system of the weapon station takes into account the vehicle contours as well as the vehicle specific array of hatches, doors and sectors – the possibility of accidentally firing at the own vehicle is thereby eliminated.
Everything in sight
Modular optoelectronic sensor systems also guarantee optimized field surveillance, target acquisition and combat by day, night or under poor visibility. The system comprises a high-resolution CCD color camera with zoom, a powerful thermal imaging device (cooled or non-cooled), a unique image fusion function and a laser rangefinder for the modular surveillance, operating and display concept of the weapon stations.
Best response possibilities
The high elevation aiming angle from -15° to +70° offers distinct advantages, also in urban mission scenarios. The efficient combination of weapon options, high grade optoelectronics and stabilization guarantee a fast and precise reaction to threats, even when driving.
The FLW 100 additionally allows:
- Adaption of protection systems (fog, NLW, etc.)
- Adaption of further weapons of similar caliber
- Adaption of ballistic protection elements
- Integration sensors, such as „sniper detection“
- Scan mode
- Adaption to command and simulation systems, recording software, etc.
REMOTE CONTROLLED LIGHT WEAPON STATION FLW 200
Modular and efficientThe remote controlled Light Weapon Station FLW 200 is constructed in a completely modular design. Via a standardized interface weapons of calibers 7,62/12,7 mm up to a 40 mm grenade launcher can be integrated quickly and safely. The interface and operating software permit the weapon system to be changed within minutes. The respective armaments – from the machine gun to the grenade launcher – are automatically detected and the weapon station adapts its ballistics accordingly. Source kmweg.com
Rheinmetall’s Rapid Obscurant System (ROSY) system
The ROSY_L smoke protection system helps to protect the crew and passengers of military and civilian vehicles from surprise attacks and ambushes e.g. during reconnaissance patrols or while travelling in convoy. Unlike conventional smoke and obscurant systems, ROSY_L produces within one second an instantaneous, large-area, multispectral interruption of the line of sight that shields even moving vehicles with a dynamic, long-lasting smoke screen.
Its multi-mission capability assures 360° protection from multiple attackers (stream and wave attacks). Moreover, thanks to effective screening in the visual and infrared spectrums, including integrated IR jamming and decoying effects, ROSY_L effectively thwarts attacks with all types of TV-, EO-, IR-, IIR-, laser- und SACLOS-guided weapons.
ROSY_L encompasses a basic system with a manual control unit and from one to four ROSY launchers per vehicle. A “one-click” adapter makes mounting the system on vehicles quick and easy, with no need for tools, particularly suitable for “fitted-for” installations.
Furthermore, the system features extreme modularity and can be directly linked to the sensor suite of the carrier vehicle’s computer systems. The ammunition variants can be individually selected and triggered, enabling optimum positioning of smoke screens. Source pressebox.com
At MSPO 2015
A interesting new offer presented in MSPO 2015 is the one made jointly with Rheinmetall MAN Military Vehicles (RMMV), Krauss-Maffei Wegmann (KMW), and Poland’s ROSOMAK S.A. They showed the AMPV multirole wheeled vehicle which they offer for the PEGAZ (PEGASUS) modernization programme. This programme aims to procure up to 500 vehicles in two versions (combat and control) for the Land Forces (300) and Special Forces (200).
The AMPV is offered to Poland via RMMV, KMW, and Rosomak SA.
A version presented during MSPO 2015 has a more optimised interior design in order to accommodate required communication systems, weapons and additional equipment which might be necessary during long-range operations by Polish special forces. The transport section has been enlarged by 30 cm, which was necessary in order to meet PEGAZ’s requirements. This vehicle might be equipped with ROSY (Rapid Obscuring System for Land Vehicles) of Rheinmetall, which provides 360 degree protection. As presented, the AMPV was equipped with FONET internal communication system made by Poland’s WB Electronics and the ZSMU-1276 remotely controlled weapon system made by Poland’s ZM Tarnów (with thermal camera, daylight video camera, laser rangefinder and either 7,62 mm or 12,7 mm gun). In a standard configuration, the AMPV provides ballistic protection at Level 3 and mine protection at Level 4a/3b (ultimately 4b) according to STANAG 4569. Its declared range is 700km, maximum speed 110km/h. It can be transported by CH-47 and CH-53 helicopters or by transport aircrafts.
The AMPV features ZM Tarnow’s RCWS, and Rheinmetall’s ROSY.
Remote-controlled modules weapons OBR SM Tarnów
To remotely control modules (position), weapons fulfilled the requirements for the weapons of the modern battlefield, must possess a number of important characteristics. These positions should be a lightweight and efficient armament of tanks, military vehicles (eg .: wheeled armored personnel carriers, light commercial vehicles personality-field), vessels and stationary objects. They should ensure that customs and efficient fire without exposing the crew to the impact of the opponent. The design of them shall be able to configure weapons (eg .: heavy machine gun, machine gun, automatic grenade launchers and guided missiles) and the selection of appropriate modules observation and aiming for the weapons used. Posts should enable the implementation of the necessary range of angles the location of weapons and the correct speed and precision guidance, aimed to allow the operators of those positions on combating moving at different speeds ground targets and air targets such as .: helicopters.
Family ZSMU “Kobuz” used modules also have to provide an appropriate range of observation, the scope aiming in any weather conditions and at any time of the day or night. Remote control stations using weapons desktop with monitor and joystick placed in the vehicle to ensure maximum operator safety, because it is protected against fire from armored vehicle on which is mounted position. The use of remote-controlled weapon stations should not require significant changes in vehicle construction and reconstruction of systems of protection. Construction they should be characterized by easy assembly and disassembly of various types of weapons and ease of use. The base remotely controllable unit armed HM-ZSMU – A Basis for the remote-controlled unit armed HM-ZSMU-A is a set of enabling mounting: cradle for rifle 7.62 PKT (UKM 2000C ) cradle for gun 12.7 WKM-B universal cradle for gun PKT 7.62 (UKM 2000C) and 12.7 WKM-B or cradle for other types of equipment, eg. 40 mm grenade launchers. It is equipped with an adapter (beams) for fixing it on all types of passenger and cargo vehicles.
Basis of remotely controlled weapon module HM-ZSMU-A, its basic units and parts:
1. The beam (adapter)
2. The base rotational bearing
3. Chop the left (with the base drive raised)
4. Chop the right foundation for the measuring system to raise
5. Bolts marching (elevation and rotation)
6. System for measuring the angle of rotation
7. The base of the kickers smoke grenades
8. Reducer drive on the market
9. Reducer drive in raising
10. The control system
11. Swivel connector. Depending on the weapon, the basis of remotely controlled weapon module HM-ZSMU-A equipped with a cradle unit to be mounted gun 12.7 WKM-B, or 7.62 PKT (UKM-2000C). Remotely controlled weapon module ZSMU -762 A1
The ZSMU -762 A1 consists of the following elements:
1. Basis of remotely controlled weapon module HM-ZSMU
2. The team cradle for 7.62mm rifle UKM-2000C
3. The power supply system in the ammunition box with ammunition 250 pcs.
4. 7.62 mm rifle UKM-2000C with elektrospustem and components for assembly
5. The team aiming the camera day-night. Remotely controlled weapon module ZSMU-1276 A1
The ZSMU-1276 includes the following elements:
1. Basis of remotely controlled weapon module HM-ZSMU-A,
2. Team universal cradle for mounting gun 12.7 WKM-B or
rifle 7.62 UKM 2000C,
3. The power supply system in the ammunition box with ammunition for 150 or 200 pcs.,
4. Rifle 12.7 WKM-B elektrospustem and muzzle brake,
5. The team aiming the camera day-night. Remotely controlled weapon module has been installed and tested at the testing polygon on the car HMMWV 1043.Remotely controlled weapon module ZSMU-1276 A2
Completing the module intended for mounting on Rosomak
In consists of the following components:
I. Cradle complete
I.1. 12.7 mm rifle WKM-B system with adaptive
I.1.1. 12.7 mm rifle WKM-B
I.2. Trigger mechanism
I.3. 7.62 mm rifle UKM-2000C system with adaptive
I.3.1. 7.62 mm UKM-2000C (equipped with rifle sights UKM-
I.3.2. Trigger mechanism rifle 7.62
I.4. The mechanism of electrical overload
II. Bed complete lower HM-ZSMU (without beam)
II.1. Team bed
II.2. Bolt marching
II.3. The base pin
II.4. The base drive
II.5. System for measuring the angle of rotation
III. Fixing the ammo box
III.1. Box ammunition 12.7 (200 pcs.)
IV. Handle box
IV.1. Ammunition box 7.62 (250 pcs.)
V. Team grenade launchers
VI. Team sensors
VI.1. TV camera CCD
VI.2. An infrared camera
VI.3. Laser rangefinder
VII. ARM-08 / RM electromechanical equipment
VII.1. The control
VII.3. The band servo azimuth
VII.4. The encoder position in azimuth
VII.5. The band servo elevation
VII.6. Position encoder elevation
VII.7. Rotary joint
VII.9. Cable harnesses
VII.11. The keypad and module GYRO.
VIII. SSP-1 WHO “OBRA-3KTO” System samoosłony vehicle.
Module ZSMU-1276 A2 with a gun 12.7 WKM-B
Module ZSMU 1276-A2 rifle 7.62 UKM-2000C Intended basic assemblies ZSMU-1276 A1 mount a complete module armament and base swivel module weaponry , integrates all the basic mechanical systems remotely controlled weapon module and provides guidance weapon in azimuth in the range of angles x 360 degrees.
Bed complete (left) and turntable cradle is designed for installation and weapon control and for mounting the optoelectronics. It allows you to give an appropriate angle to raise weapons in the area -5o to more than 50 ° and allows you to change options of weapons and use 7.62 mm machine gun UKM-2000C. In the cradle is mounted electric system overload
Cradle complete 12.7 mm heavy machine gun WKM-B The team consists of: – WKM-B – muzzle brake, – elektrospust, – recoil dampers, – the rear clamp
12.7 mm heavy machine gun WKM-B system with adaptive 7.62 mm machine gun UKM-2000C , on which is mounted targeting systems rifle UKM-2000P
7.62 mm machine gun UKM-2000C system with adaptive system Adapter allows you to mount and operate gun UKM-2000C on ZSMU-1276 A2
Servo geared elevation and azimuth control in speed or positional weapons; in the servo motors include permanent magnet synchronous converters with rezolwerowymi shaft position, cycloidal gear (elevation) with high mechanical characteristics – high efficiency, high overload, lack of backlash and the planetary gear (azimuth) of high efficiency, very small clearances. In addition, propulsion systems have sufficient torque reserve allowing the correct operation of the three-axis stabilization.
Servo elevation system supply ammunition , comprising a removable ammunition box placed in the rack, which zataśmowana ammunition through the feed is fed to the gun WKM-B or UKM-2000C.Uzupełnianie ammunition ready for use is realized by exchanging boxes for ammunition suspended cradle module weapons. Boxes are located inside the vehicle. Reload the gun operator performs the desktop placed in the cradle controlling system overload, and in case of emergency operation, by overloading performed manually through the hatch on the outside of the vehicle. In safe mode, the operator can disengage the electric drive motor, which allows manual control of weapons and firing using a manual trigger. Guidance weapons at the target is carried out with the help of full-time iron sights weapons.
The power supply system to the gun 7.62 mm UKM-2000C (left) and 12.7 mm WKM-B option can be powered rifle 12.7mm ammunition from the box through a flexible sleeve. Flexible connection used to carry zataśmowanej 12.7 mm ammunition between the chest and throat ammunition karabinu.Rękaw flexible is a series of interconnected movable together narrow clamps the cartridge called cells. This makes for the possibility of movement of the belt ammunition in 3-ch directions. Flexible connection is connected to the ammunition box and the support sleeve on the cradle releasably, which allows for quick installation and removal of the tape ammunition.
a flexible sleeve
Link in the chain – in the middle of zataśmowany cartridge system grenade launcher containing 6 pcs. Smoke grenade launchers mounted on a swivel turret or elsewhere on nosicielu WHO ROSOMAK 1.Granaty smoke launcher can be fired from the operator panel or the desktop ZSMU OBRA-3. the hood can be inserted in the ejector, which is mounted on the front wall ZSMU 1276-A2. In this case, it is possible to use only grenades type GAK-81 and GM-81. When using other than / in – guns should be mounted outside the module such weapons. On adaptive system for mounting ZSMU-1276 A2 WHO or on the body of WHO ROSOMAK- 1.
Team grenade launchers mounted on the module ZSMU-1276 A2
Remote controlled weapon ZSMU-1276 A2 with a mounted band ejectors
A sample set of ejectors installed on the system Adaptive next ZSMU-1276 A2 Control systems devices ZSMU-1276 A2 Control panel and desktop wynośny consist of a 10 “LCD display with high contrast and keypad to speed-electric drives. On the desktop are placed switches and buttons to control the teams accessories, as well as lights indicating the current states of the devices. The display addition to the signal from the camera were placed additional information about the current position of the turret and armed state – the angles of elevation and lifting, ammunition and other.
Control panel – wynośny Controls nap Edam in elevation and azimuth, containing programmable module setting the zones prohibited and control of security against the possibility of control, eg. At the opening of the hatch. Control module supports input and output signals turrets and containing ballistic calculator.This module converts signals from the encoder absolute position in azimuth and elevation and provides support and control grenade launcher and elektrospustu. It also includes a system of counting missiles and programming the duration of the series. Three-axis stabilization unit compensates for the effect of the acceleration (found for example. During the movement of the vehicle) impinged on the rifle. Stabilization keeps a rifle axis directed in point.Stabilization unit is mounted on the fixed elements of WHO in the area of building ZSMU 1276-A2. The module optoelectronic laser distance meter allows you to measure the distance to the target. This measurement is used for calculator ballistic. You can work tools without a laser rangefinder, the information about the distance to the goal inflicted. Laser rangefinder, which is equipped optoelectronic module is a Class III and niskomocowym, secure to the unaided eye of a scale in the range of 100 to 2500 min I accuracy not worse than ± 5 m.
Block Diagram Connection ZSMU-1276 at KTO TV camera in this version there is a daily TV camera with zoom lens enabling a smooth change of the field of view range from 30º to 1º This range is provided mainly for observing the area around the car, to search, track and engage targets moving quickly within destruction of weapons and for the detection of distant objects, as well as to improve the precision targeting objects within range weapons destruction. An infrared camera enables the identification of targets with dimensions of 4.6 2.3x distant at least 800 m in night conditions.
Team sensors – TV camera and thermal imager and laser rangefinder warning system for radiation SSP-1 OBRA-3 is mounted at the desired location, and WHO is connected to a control ZSMU-1276 A2. Information about radiation are transferred from OBRA-3 to the control ZSMU-1276 A2. Launchers are controlled from the operator panel. Operator fires grenades in the selected mode (automatic or semiautomatic) .If installation launcher system adaptive enter limitations resulting from the collision of weapons ZSMU flight paths and smoke grenades. Parameters tactical and technical ZSMU-1276 A2 and its component teams Tactical data: With wielkokalibrowym 12,7x99mm machine gun WKM-B – the mass of the module in full bundling 200 kg (full module configuration) – scatter 2x5strz. 100m distance R80 ≤ 65 cm – accuracy 2x5strz. distance 100m max. Pc – SPT≤27 cm With 7,62x51mm machine gun UKM-2000C – mass module full bundling 180 kg – scatter 2x5strz. 100m distance R80 ≤ 24 cm – accuracy 2x5strz. distance 100m max. Pc – SPT≤10 cm Operation 1 person Range of elevation angle (to raise) from -5 ° min. + 50 ° angle range azimuth (rotation) x 360 ° control of the speed drives positional or angular velocities homing weapons horizontally and vertically: minimal – 1 mrad / s maximum – 2.5 rad / s (level) of 1.5 rad / s ( vertical) the maximum acceleration of 2.5 rad / s2precision guidance and stabilization of weapons ≤ 2.5 mrad system parameters aim: camera day: – CCD sensor resolution of 798 x 548 pixels – field of view of 1 ° to 30 ° (horizontal) – power supply 18 ÷ 32 VDC – standard output 1Vpp; 75V; pal – control interface RS 422 infrared camera -detektor does not require cooling, -Pol view -Wide 20ox15o -wąskie 5o x 3,75o -length wave of 8 to 12 microns -Power supply 12 VDC -interfejs control RS-422 laser distance meter class. III A safe for the human eye – the range of 100 m min. 2500 m – measuring accuracy of ± 5 m Number of ammunition 12.7 x 99 mm ready to use 200 units. The amount of ammunition 7.62 x 51 mm ready for use 250 pcs. Quantity of ammunition 12.7 x 99 mm carried in the vehicle (unit fire ) (6 boxes) 1 200 pcs. Quantity of ammunition 7.62 x 51 mm carried in the vehicle (fire unit) (8 cases) 2000 pieces. Launchers smoke grenades: 6 pcs. the warning system for radiation SSP-1 “OBRA-3” power source (with on-board network carrier) DC 24 V ± 4V remotely controlled weapon module ZSMU-127 B1 in the last two years in Research and Development Mechanical Equipment developed remote controlled weapon ZSMU-127B1. The main feature which distinguishes it from the family A1 is the fact that the ammunition box is not suspended to the cradle, but is attached to the turntable, and power rifle ammunition takes place through the flexible duct. Translated by google – Source js2010.pl
The AMPV is powered by a 3.2-liter turbocharged diesel engine, developing 272 hp. Engine is coupled with an automatic transmission. Vehicle has a full-time all-wheel drive. The AMPV is fitted with a central tyre inflation system as standard. It is claimed that this vehicle has good cross-country mobility over rough terrain.
ECS: AMPV AWD Drivetrain
ECS’s 4WD-drivetrain is well-suited for AWD special vehicles and commercial vehicles in class N2 up to 10t for optimised off-road mobility.
Features and specifications
- Optimized performance on- and off-road
- Automatic gearbox (six-speed)
- Synchronised two-speed transfer case with permanent AWD
- Identical design of front and rear axle differential
- Modular design of the planetary wheel hubs with CTIS capability
- Electronically controlled differential locks for optimum traction
- Designed for high mobility due to independent suspension system on all wheels
- Weight optimised design
- Proven strength and durability
- Climate area C1 to A1 according to STANAG 2895
- Used in high-mobility multi-purpose vehicles
Steyr M16SCI, 3.2-litre
Motive power is provided by a Steyr Motors M16 SCI diesel engine that has the ability to operate for extended periods on high sulphur, low quality and military-specific fuels such as F34/JP-8. Twin 150A alternators provide electrical power for engine and associated systems, radios/communications equipment, and ancillaries such a remote weapon station. Source wikipedia.org
|Engine Type||M16 SCI|
|Bore (mm)/Stroke (mm)||85/94|
|Combustion system||direct injection diesel engine|
|Charge system||sequential charged with intermediate cooler|
|Rated power [kW]||200|
|Rated speed [rpm]||4000|
|Max. torque [Nm] at||610/2000|
|Specific fuel cons. [g/kwh]]||205|
|Exhaust emission||EURO III/IV/V|
|Generator||14V or 28V/65-100A|
|Starter motor||12V or 24V/2.0-4.0 kW|
|Fuel feed pump||electrical|
|Power steering pump||option|
Engine data steyr-motors.com
|Cab seating||4 men|
|Dimensions and weight|
|Weight (empty)||7.3 t|
|Payload capacity||2.6 t|
|Machine guns||7.62-mm or 12.7-mm|
|Engine power||272 hp|
|Maximum road speed||110 km/h|
|Vertical step||~ 0.5 m|
|Trench||~ 0.5 m|
|Fording||~ 1.2 m|
Main material source military-today.com